end of life - august 2013 fp..p www.vishay.com vishay dale revision: 05-feb-13 1 document number: 31030 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 metal film resistors, pulse withstanding protective features ? special vishay dale de sign provides lightning withstand characteristic s along with resistor functionality ? a thicker tin oxide power film system provides lightning surge absorption capabilities ? higher turns ratio and glass substrate provide sharper fusing characteristic than the standard flameproof product line ? protect against a variety of electrical hazards which can change or destroy sensitive electronic equipment including high energy voltage surges caused by power lin e anomalies (direct power crosses or inductively co upled effects) and other momentary overvoltages ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note * lead (pb)-containing terminations are not rohs-compliant. exemptions may apply. notes (1) pulse withstanding capabilities are value dependent. values abov e the cutoff value will meet all of the surge test requirements shown on the following pages. (2) contact factory for values outside these published ranges. notes (3) some packaging codes are model specific. (4) for additional information on packaging, refer to the through hole resistor packaging document ( www.vishay.com/doc?31544 ). standard electrical specifications global model historical model power rating p 70 c w resistance range (2) ? tolerance % cutoff value (1) fp1/2p fp1/2p 0.5 10 to 1m 1, 2, 5 2k00 fp001p fp1p 1 10 to 1m 1, 2, 5 1k00 fp002p fp2p 2 355 to 125k 1, 2, 5 355r fp003p fp3p 3 46.4 to 125k 1, 2, 5 250r fp069p fp69p 2 25 to 126k 1, 2, 5 400r marking - dale - value - tolerance - style and case size - date code (year/week) global part number information new global part nu mbering: fp002p1k00f9256b8 (preferred part numbering format) global model resistance value tolerance code spec codes packaging (3) (see standard electrical specifications table) r = ? k = k ? m = m ? 10r0 = 10 ? 1k30 = 1.3 k ? 1m00 = 1.0 m ? f = 1 % g = 2 % j = 5 % 5555 = fp1/2p 6206 = fp001p 9256 = fp002p 9303 = fp003p 7532 = fp069p ek = lead (pb)-free, strip ea = lead (pb)-free, t/r b8 = tin/lead, strip ch = tin/lead, t/r (750 pieces) cj = tin/lead, t/r (1000 pieces) historical part number: fp2p 1k00 1 % b8 (will continue to be accepted) fp2p 1k00 1 % b8 historical model resistance value tolerance code packaging 02p1 0 f9 k p0 56b 2 f 8 0
end of life - august 2013 fp..p www.vishay.com vishay dale revision: 05-feb-13 2 document number: 31030 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) lead length for product in strip pack. for product supplied in tape and reel, the actual lead length would be based on the body size, tape spacing and lead trim. dimensions in inches (millimeters) global model ab d fp1/2p 0.360 0.020 (9.14 0.51) 0.138 + 0.012 - 0.023 (3.51 + 0.31 - 0.58) 0.032 0.002 (0.81 0.05) fp001p 0.560 0.031 (14.22 0.79) 0.190 + 0.005 - 0.030 (4.83 + 0.13 - 0.76) 0.032 0.002 (0.81 0.05) fp002p 0.687 0.031 (17.45 0.79) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) fp003p 0.900 0.055 (22.86 1.40) 0.300 0.020 (7.62 0.51) 0.032 0.002 (0.81 0.05) fp069p 0.516 0.021 (13.11 0.53) 0.225 0.012 (5.72 0.31) 0.032 0.002 (0.81 0.05) a 1.500 0.125 (1) (3 8 .10 3.1 8 ) d b 120 100 8 0 60 40 20 0 0 50 100 150 200 250 300 derating fp1/2p fp001p, fp002p, fp003p % of rated power ambient temperature c 120 100 8 0 60 40 20 0 0 50 100 150 200 250 300 derating 3 w 2 w fp069p 0.6 w + 70 c + 25 c ambient temperature c % of rated power
end of life - august 2013 fp..p www.vishay.com vishay dale revision: 05-feb-13 3 document number: 31030 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 lightning pulse wave forms lightning pulse wave forms ar e defined by three numbers: ? maximum time to reach peak voltage level (typically 10 s) ? minimum time for voltage to decrease to half value ? the peak voltage level three examples are shown below. 10 by 560 s up to 8 00 v fcc - metallic surge 10 by 1000 s up to 1000 v rea - current surge 10 by 160 s up to 1500 v fcc - longitudinal surge volts s 0 400 8 00 1200 1600 200 600 1000 volts volts s 0 400 8 00 1200 1600 200 600 1000 s 0 400 8 00 1200 1600 200 600 1000
end of life - august 2013 fp..p www.vishay.com vishay dale revision: 05-feb-13 4 document number: 31030 for technical questions, contact: ff2aresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 these graphs show the relationship value and pulse withstanding voltage for fp1/2p thru fp003p using a 1.0 % resistance shift after 10 pulses as the figure of merit. th e stable operating region of each package is on the right side of the appropriate lin e. packaging global model packaging type packaging code lead (pb)-bearing lead (pb)-free fp1/2p, fp001p, fp069p strip b8 ek tape/reel cj ea fp002p, fp003p strip b8 ek tape/reel ch ea fp069p fp002p fp003p fp001p fp1/2p (1500 at 2 k ) 10 x 160 s volts 1750 1500 1250 1000 750 500 250 0 100 300 fp003p fp002p fp069p fp001p fp1/2p resistance ( ) fp002p fp069p fp001p fp1/2p volts volts resistance ( ) resistance ( ) 500 700 900 100 300 500 700 900 1750 1500 1250 1000 750 500 250 0 10 x 560 s 10 x 1000 s 100 300 500 700 900 1750 1500 1250 1000 750 500 250 0 fp003p
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
